1/2” Tubing is the standard tubing used to connect to pumps, 1/2” connectors, etc. It is flexible and does not kink easily. The 3/4” tubing is used to connect to 3/4” pump outlets. Available in translucent blue and solid black. Solid black prevents algae growth. The blue color allows you to see the flow of [...]

These float valves are made to connect to 1/4” tubing and are perfect for hooking up to the Reverse Osmosis Systems to control water production. Available with either a long or short stem. They are brass and will last for years.

An essential part for do-it-yourself hydroponic systems and maintaining reservoir levels. It has a 1⁄2” brass barbed fitting to attach to standard 1⁄2” tubing.

1/4” Vinyl Micro Tubing is used to go from 1/2” Poly line to the drippers or drip stakes that will water your plants. It comes in 50’ and 100’ lengths. Simply attach the 1/2” Poly line with 1/4” connectors for a leakproof fit.

When making a Drip System, poly tubing is used as the main drip line. You punch holes into it using a hole punch, and then insert 1/4” connectors to attach to 1/4” vinyl tubing which is attached to your drippers or drip stakes. The end is sealed using a Poly End Plug.

A barbed connector is used for attaching 2 lengths of tubing together. Use Elbows where right angles are needed to get around corners. Tees are used for branching of tubing. Shut-Off Valves are useful for many things. Click Clamps will hold tubing on pumps and barbed fittings, preventing the tubing from loosening over time.

These End Plugs are used at the end of your 1/2” Poly Tubing to close it off to create pressure for your drippers, etc.. The cap is removable and has a 3/4” hose fitting on the end to connect to a hose for easy drip line flushing and cleaning.

These No Clog Drip Stakes are for use with hydroponic drip-watering systems. These drip stakes are designed with a protective basket to prevent buildup and clogs. They are 4” tall and stick perfectly into rockwool cubes or grow rocks for intermittent or constant watering. They are not pressure compensating, so they will not clog. They [...]

The ADC-1, Auto-Drain Controller, allows you to put in a wastewater drain anyplace that you would like. It consists of a controller bucket with a float switch. When the float switch detects the presence of water, it turns on the pump (not included) to pump out your water to a waste drain of your choice, [...]

Our Micro Spray Jets are great for building your own aeroponic or cloning systems. These jets deliver a 360° water spray using just pump pressure. They can be screwed into PVC piping or Poly tubing.