Active Air Carbon Filter, 6" x 16", 400 cfm

The 6 x 16 in Active Air Carbon Filter is an indoor grow carbon filter that neutralizes air odor before it leaves the tent or room. It comes loaded with virgin granular activated carbon of Australian origin, which traps the volatile organic compounds responsible for the aroma. It is installed in line with a 6 in extractor and works continuously throughout the cycle.

Benefits

• Virgin granular activated carbon with a 1.8 in deep bed for efficient odor and VOC adsorption.
• Recommended airflow of 400 CFM, suitable for 6 in in-line extractors.
• Integrated flange, powder-coated aluminum tops and bases, resistant to grow room humidity.
• Includes pre-filter that protects the carbon surface from dust and lint.
• Lifespan of up to two years depending on environmental conditions and hours of use.

How to use

Hang the filter inside the tent and connect it to the 6 in extractor inlet with flexible ducting and clamps. Place the pre-filter over the body of the filter before turning on the system and change it as soon as it looks dirty. Keep the filter dry: activated carbon is not washed or recovered with water.

Available at Pachamama with shipping to all of Costa Rica.

Technical Sheet

• Size: 6 in flange x 16 in long
• Recommended airflow: 400 CFM
• Carbon: Virgin granular activated carbon of Australian origin, 1.8 in deep bed
• Construction: Integrated flange, powder-coated aluminum tops and bases
• Includes factory pre-filter
• Estimated lifespan: up to 2 years depending on environmental conditions

Instructions for use

• Hang the filter inside the tent or room and connect it to the 6 in in-line extractor inlet
• Use 6 in flexible ducting and clamps to seal the connection well
• Place the pre-filter covering the entire body of the filter before turning on the system
• Replace the pre-filter when it looks dirty or discolored
• Do not wash or wet it: activated carbon is not cleaned with water
• Store it in a dry place protected from dust when not in use