Active Air Non-Insulated Air Duct, 10 in - 25 ft

The Active Air Non-Insulated Air Duct 10 in x 25 ft is a flexible duct for indoor grow ventilation. It connects the exhaust fan, carbon filter, and air outlets to remove heat, humidity, and odor from the room. Its double-layer construction withstands daily use and conforms to bends and corners.

Benefits

• 10 in diameter and 25 ft long per roll: sufficient for complete installations.
• Flexible and compressible double layer, easy to fit in tight spaces.
• Operating range from -4 °F to 175 °F, approximately -20 °C to 79 °C.
• Includes 2 stainless steel clamps for connections.
• AS 4254-1995 fire rating.

How to use

Extend the duct to its full length before installing to avoid air flow loss. Connect it to the flanges of the exhaust fan and filter, tighten the included clamps, and seal with aluminum tape if you need an airtight joint. Keep the runs as straight as possible and avoid sharp bends.

Available at Pachamama with shipping throughout Costa Rica.

Technical Specifications

• Diameter: 10 in
• Length: 25 ft (approximately 7.6 m) per roll
• Construction: flexible non-insulated double-layer duct
• Temperature range: -4 °F to 175 °F (approx. -20 °C to 79 °C)
• Fire rating: AS 4254-1995
• Includes 2 stainless steel clamps

Instructions for use

• Extend the duct to its full length before installing to avoid air flow loss
• Connect it to the flanges of the exhaust fan and carbon filter and secure it with the included clamps
• Seal the joints with aluminum tape if you need an airtight installation
• Avoid sharp bends and excessive compression: keep runs as straight as possible
• Check for rips, punctures, or loose clamps in each cycle
• Store it rolled, dry, and away from direct heat sources