Active Aqua 3/4 in Elbow Connector

The Active Aqua 3/4 in Elbow Connector is a 90-degree barbed elbow for 3/4-inch inner diameter hose, the part you need when an irrigation line has to bend around a corner without kinking. Forcing the hose into a tight bend reduces flow and eventually leads to cracks; the elbow keeps the passage clear and the turn firm. It is made of high-strength polypropylene, compatible with nutrient solutions.

Benefits

• 90-degree bend that prevents kinks and maintains even flow in system corners.
• Barbed ends connect with a pressure fit to 3/4 in ID hose, no tools required.
• Polypropylene resistant to chemicals and constant moisture.
• Facilitates routing nutrient lines flush with the wall or table edge.
• Compatible with Active Aqua and most standard 3/4 in ID hydroponic fittings.

How to use

Firmly push the hose onto each barbed end until it is well seated; if the vinyl is stiff, soften it for a few seconds in warm water. In pressurized or high-flow applications, reinforce each joint with a clamp. Rinse with clean water between growing cycles and replace any elbow that shows cracks or loss of grip.

Pachamama Indoor Farming Culture ships to anywhere in Costa Rica.

Technical Data Sheet

• Size: 3/4 in ID barbed elbow connector — 90-degree bend
• Material: High-strength polypropylene — chemical resistant
• Barbed ends for pressure connection with 3/4 in ID hose
• Ideal for directing nutrient solution lines around corners of irrigation systems
• Compatible with Active Aqua and most standard 3/4 in ID hydroponic connections

How to Use

• Firmly push the 3/4 in ID hose onto both barbed ends until it is well seated
• Use clamps for added security in high-flow applications
• Rinse with clean water between growing cycles to prevent salt and algae buildup
• Regularly inspect connections for loosening or cracks
• Replace any connection that shows signs of structural damage