Active Aqua 3/4 in Fill/Drain Fitting
Available in stock (62)
Couldn't load pickup availability
Comprados juntos frecuentemente
Basado en pedidos reales de clientes: estos productos funcionan juntos.
Descripción del producto
Descripción del producto
The Active Aqua 3/4 in Fill/Drain Fitting is the connector that communicates the flood table with the reservoir in hydroponic ebb and flow systems. It is installed in the tray hole and allows the nutrient solution to rise during filling and return to the tank at the end of the cycle, all through a 3/4-inch hose driven by the pump. Its threaded design with a rubber gasket seals the passage without the need for glue or sealant.
Benefits
- Connects table and reservoir with 3/4 inch hose, for both filling and return.
- Rubber gasket seal: clean, removable installation without chemical sealant.
- Heavy-duty polypropylene, chemical resistant and reusable between cycles.
- Compatible with Active Aqua flood tables and most standard 3/4 inch ports.
- Disassembles in seconds for thorough tray cleaning between harvests.
How to Use
Insert the connector into the table hole with the rubber gasket in place and hand-tighten the threaded nut; avoid overtightening, which deforms the gasket. Connect the 3/4 inch internal diameter hose coming from the pump and run a test cycle with water only to check the seal. Rinse the connector between cycles and check the gasket for wear or cracks.
Available at Pachamama Indoor Farming Culture with shipping throughout Costa Rica.
Technical Specifications
- Size: 3/4 in internal diameter fill and drain connector for hydroponic ebb and flow tables
- Material: heavy-duty polypropylene — chemical resistant and reusable
- Threaded design with rubber gasket for a watertight installation in the table port
- Compatible with Active Aqua flood tables and most standard 3/4 in ports
- Used as a fill inlet — connects to 3/4 in pump hose
How to Use
- Insert into the table port with the rubber gasket for a watertight seal
- Hand-tighten the threaded nut — avoid overtightening
- Connect 3/4 in internal diameter pump hose to the fill connector inlet
- Wash the connector with clean water between growing cycles
- Check the rubber gasket for wear or cracks in each cycle
Especificaciones
Especificaciones
Uso y cuidado
Uso y cuidado
Tu información de pago se procesa de forma segura. Pachamama no almacena ni tiene acceso a los datos completos de tu pago.
Todo lo que necesitas para cultivar con confianza
En Pachamama reunimos marcas de confianza, productos probados y artículos esenciales seleccionados para necesidades reales de cultivo. Desde nutrientes e iluminación hasta sistemas hidropónicos y cuidado de plantas, nuestro catálogo está creado para ayudar a los cultivadores a comprar con más claridad, confianza y respaldo.
