Active Aqua 3/4 in T Connector

The Active Aqua 3/4 in T Connector is a barbed T-connector for hydroponic irrigation that splits or joins three 3/4-inch ID hose lines. It is used to distribute nutrient solution from a single pump to several trays, pots, or drip points, without having to duplicate equipment.

Benefits

• Three barbed ports for firm, leak-free push-fit connections.
• Divides the flow from the main line into two irrigation branches.
• Plastic resistant to impact and corrosion from fertilizers.
• Compatible with Active Aqua accessories and standard 3/4 in ID hydroponic connections.
• Easy to disassemble, clean, and reinstall between growing cycles.

How to use

Insert the 3/4 in ID hose into all three ports until it is seated at the bottom of each barb. If you leave a port unused, close it with a 3/4 in plug to prevent leaks. Place clamps on each outlet when working with high flows and rinse the part with clean water at the end of each cycle.

Get the Active Aqua 3/4 in T Connector at Pachamama, with shipping throughout Costa Rica.

Technical Specifications

• Size: T-connector with 3/4 in ID barbs — splits or joins three 3/4 in ID hose lines
• Material: High-strength polypropylene — chemical resistant
• Barbs on all three ports for secure push-fit connections
• Ideal for splitting nutrient solution flow to multiple growing points or trays
• Compatible with Active Aqua and standard 3/4 in ID hydroponic connections

Instructions for use

• Insert 3/4 in ID hose into all three barbed ports until fully seated
• Cap any unused port with a 3/4 in plug to prevent leaks
• Use clamps on each port in high-flow or pressurized systems
• Rinse with clean water between growing cycles to remove salts and biofilm
• Check all three connections at each cycle change for loosening or cracking