Active Aqua Replacement Impeller for AAPW1000

The Active Aqua Replacement Impeller for AAPW1000 is the replacement impeller for the Active Aqua AAPW1000, 1110 GPH submersible pump. When the pump loses flow, vibrates, or changes sound, a worn or sediment-clogged impeller is almost always to blame: changing it restores performance without having to replace the entire unit.

Benefits

• Specific replacement for model AAPW1000 (1110 GPH / 4198 L/h, 80 W)
• Recovers the original flow and pressure of the pump in your hydroponic system
• Economical alternative to buying a new pump
• Same-brand replacement: correct fit and tolerances
• Replacement takes only a few minutes and requires no special tools

How to Use

Always disconnect the pump from the power before handling it. Remove the front cover and inlet grille to access the impeller chamber, remove the old impeller, and clean the cavity with a soft brush and running water. Install the new impeller, confirm it spins freely, and close the pump back up. Never operate it dry.

Available at Pachamama Indoor Farming Culture, with shipping to all of Costa Rica.

Technical Specifications

• Type: Replacement impeller for submersible pump
• Compatibility: Exclusively for Active Aqua AAPW1000 pump
• Nominal pump flow rate: 1110 GPH (4198 L/h)
• Pump consumption: 80 W
• Brand: Active Aqua (Hydrofarm)
• Not compatible with other models in the AAPW line

Instructions for Use

• Disconnect the pump from the power before handling
• Remove the front cover and inlet grille to access the impeller chamber
• Remove the worn impeller and clean the cavity with a soft brush and running water
• Install the new impeller, ensure it spins freely, and close the pump back up
• Check the impeller and grille once a month to extend the pump's lifespan
• Never operate the pump dry or with water above 30 °C (86 °F)