Active Aqua Replacement Impeller for AAPW160

The Active Aqua Replacement Impeller for AAPW160 is the replacement impeller for the Active Aqua AAPW160 submersible pump, 172 GPH. It is the part that wears out first in a pump: when the flow rate drops, the pump vibrates or makes noise, replacing the impeller restores performance without having to buy new equipment.

Benefits

• Specific replacement for model AAPW160 (172 GPH / 650 L/h, 9.5 W)
• Restores original pump flow rate in small and medium hydroponic systems
• Economical alternative to buying a new pump
• Same brand replacement: correct fit and tolerances
• Replacement takes only a few minutes and requires no special tools

How to use

Unplug the pump before handling it. Remove the front cover and inlet screen to access the impeller chamber, remove the worn impeller, and clean the cavity with a soft brush and running water. Install the new impeller, check that it rotates freely, and reassemble the pump. Remember that the AAPW160 is for submerged use and should never operate dry.

Available at Pachamama Indoor Farming Culture, with shipping throughout Costa Rica.

Technical Data

• Type: replacement impeller for submersible pump
• Compatibility: exclusively Active Aqua AAPW160 pump
• Nominal pump flow rate: 172 GPH (650 L/h)
• Pump power consumption: 9.5 W
• Brand: Active Aqua (Hydrofarm)
• The AAPW160 pump is for submerged use only; it is not compatible with other models in the AAPW line

Instructions for use

• Unplug the pump before handling it
• Remove the front cover and inlet screen to access the impeller chamber
• Remove the worn impeller and clean the cavity with a soft brush and running water
• Install the new impeller, check that it rotates freely, and reassemble the pump
• Check the impeller and screen once a month to extend the pump's lifespan
• Never operate the pump dry or with water above 30 °C (86 °F)