Autopilot CO2 Generator, 10 Burner, LP

The Autopilot CO2 Generator, 10 Burner, LP produces carbon dioxide by burning liquid propane to increase available CO2 in good-sized sealed grow rooms. With its ten brass burners, it delivers 22,630 BTUs and approximately 26.5 cubic feet of CO2 per hour, and the number of active burners is adjustable: you can operate it in 2, 5, 7, or 10 burner configurations depending on the space and crop demand.

Benefits

• Adjustable output in four burner configurations to adapt CO2 production to the area.
• Solid-state electronic ignition: no permanent pilot light needed.
• Tip-over safety switch that cuts off gas if the unit tilts or falls.
• Powder-coated steel cabinet that resists moisture, rust, and discoloration.
• LED error indicators that warn you before a shutdown.

How to use

The generator is installed suspended above the crop and needs free airflow from below, so do not place it on a surface. Connect it to your propane source with the appropriate regulator and operate it with a CO2 controller to regulate ppm, only during the light cycle. It is designed for spaces up to about 35 x 35 feet.

Available at Pachamama, with shipping throughout Costa Rica.

Technical Specifications

• Output: 10-burner LP propane CO2 generator
• CO2 production: up to approximately 26.5 cubic feet per hour
• Fuel: Liquid propane (LP); requires a standard LP regulator and propane source
• Electronic ignition with flame-out safety shut-off valve
• Designed for CO2 enrichment of sealed grow rooms over 2000 sq ft

Instructions for use

• Install it above the plants: CO2 is heavier than air and descends through the canopy
• Connect it to a CO2 controller to regulate ppm and prevent over-enrichment
• Operate it only during the light cycle: never enrich with CO2 during the dark period
• Ensure the grow space is sealed and ventilation is off during CO2 enrichment periods
• Regularly check burners and LP connections for leaks, soot, and flame quality