Extension Cord, 240V, 25'

This 25 ft, 240V extension cord is designed to deliver power to ballasts and indoor growing equipment located across the room. It uses 14-gauge copper wire and terminates in a molded three-outlet power strip, allowing a single 240V point to power multiple devices at once.

Benefits

• 14-gauge grounded copper wire, suitable for continuous loads in a grow room.
• NEMA 6-15P plug and NEMA 6-15R receptacles, the 240V standard for HID ballasts.
• 15 amp capacity and up to 3600 total watts.
• The 25 ft length provides reach for large rooms or for leaving the ballast outside the tent.
• Three heavy-duty molded outlets that withstand the rigors of the grow room.

How to use

Cut power to the circuit before connecting or disconnecting. Verify that the sum of the equipment's consumption does not exceed 15 A or 3600 W. Extend the cable to its full length; never leave it coiled while under load and run it along the wall, away from water and pedestrian traffic. This product is for indoor use only.

Available at Pachamama with shipping throughout Costa Rica.

Technical Data

• Length: 25 ft | Voltage: 240V | Type: Extension cord for grow room equipment
• Rated for 240V ballasts, pumps, and other grow room electrical loads
• 25 ft length provides ample reach for locating ballasts or equipment at a distance
• Verify that the rated amperage equals or exceeds the consumption of the connected equipment before use
• PVC insulation jacket resists moisture and abrasion in the grow room

How to use

• Cut power to the circuit before connecting or disconnecting
• Extend the cable to its full length; do not leave it tightly coiled while under load
• Run the cable away from water sources, pedestrian traffic, and high-temperature areas
• Inspect the entire length and both plug ends before each grow cycle
• Store loosely coiled in a dry place when not in use