Sold out

Hydro Flow Vinyl Tubing Black 3/16 in ID - 1/4 in OD

Name: Hydro Flow Vinyl Tubing Black 3/16 in ID - 1/4 in OD
Brand: Hydro Flow
SKU: HGC708220
Price: 0.37 USD
Availability: OutOfStock

Vendor: Hydro Flow

Type: Pumps and Irrigation

SKU: HGC708220

$0.37 USD

Shipping calculated at checkout.

Selección especial
Suministro confiable
Retiro en tienda disponible

Out of stock

¿Te avisamos cuando vuelva?

Dejanos tu correo y te escribimos apenas entre de nuevo. Sin compromiso.

Solo te escribimos por este producto. Podés darte de baja cuando querás.

Entrega rápida en todo Costa Rica
Retiro gratis en nuestra tienda
100% original — Distribuidor oficial de marcas

Find the right products for your grow Answer five quick questions and get recommendations matched to your setup. Start the product quiz

Descripción del producto

Premium vinyl hose manufactured with excellent quality. Made in the USA.

Technical Data Sheet

Premium quality flexible black vinyl hose.
Internal Diameter (ID): 3/16 in (4.8 mm). External Diameter (OD): 1/4 in (6.4 mm).
Wall thickness: 1/32 in (approx. 0.8 mm).
Opaque black color blocks light and helps slow algae growth inside the line.
Compatible with 3/16 inch connectors, stakes, and drippers used in drip irrigation.
Made in the United States.

How to Use

Measure and cut the length you need with hose cutters or a knife, always at 90 degrees so the cut seals well.
If the vinyl is stiff, submerge the tip in hot water for a few seconds to make it easier to insert into the fitting.
Push the hose all the way into the 3/16 inch connector and secure it with a clamp if the line is pressurized.
Lay the line without tight kinks: a bend cuts the flow and over time cracks the vinyl.
Purge the line with clean water at the end of each cycle and check for any salt or root obstructions.
Store any leftover hose coiled in a cool place, out of direct sunlight and away from solvents.

Especificaciones

Premium quality black flexible vinyl tubing.
Inner Diameter (ID): 3/16 in (4.8 mm). Outer Diameter (OD): 1/4 in (6.4 mm).
Wall thickness: 1/32 in (approx. 0.8 mm).
Opaque black color blocks light and helps prevent algae growth inside the line.
Compatible with 3/16 in connectors, stakes, and drippers used in drip irrigation.
Made in the USA.

Uso y cuidado

Measure and cut the required length with hose cutters or a utility knife, always at 90 degrees so that the cut seals well.
If the vinyl is stiff, dip the end into hot water for a few seconds to make it easier to insert into the connection.
Push the hose all the way into the 3/16 inch connector and secure it with a clamp if the line is pressurized.
Lay out the line without sharp bends: a kink cuts the flow and, over time, cracks the vinyl.
Flush the line with clean water at the end of each cycle and check for any remaining salts or roots that may be obstructing it.
Store any leftover rolled up in a cool place, out of direct sunlight and away from solvents.

Pago y seguridad

Tu información de pago se procesa de forma segura. Pachamama no almacena ni tiene acceso a los datos completos de tu pago.