Hydro-Logic Stealth RO150/300 RO Membrane
Hurry up, only 1 item left in stock.
Couldn't load pickup availability
Comprados juntos frecuentemente
Basado en pedidos reales de clientes: estos productos funcionan juntos.
Descripción del producto
Descripción del producto
The Hydro-Logic Stealth RO150/300 reverse osmosis membrane is the main filter element replacement for the Stealth-RO150 and Stealth-RO300 systems. It is the part that separates dissolved salts and minerals from the incoming water, and it defines how clean the water you use to prepare your nutrient solution will be. When PPM rejection drops or flow rate decreases, this is the part to change.
Benefits
- Produces up to 150 GPD (gallons per day) per membrane.
- Rejects up to 98 %+ of PPM, to start with clean base water and control the recipe.
- Thin Film Composite (TFC) construction, same as the original equipment.
- A Stealth-RO150 system uses one membrane; the Stealth-RO300 uses two.
- Typical lifespan of 6 months to 2 years depending on incoming water quality.
How to use
Shut off the water supply, depressurize the unit, and remove the used membrane from the housing; insert the new one by pushing until the o-ring is fully seated. Let water run for a few minutes to rinse it before using the permeate and record the incoming and outgoing PPM readings for reference. Change the pre-filters on the same visit: a saturated pre-filter shortens the membrane's life.
Available at Pachamama Indoor Farming Culture, with shipping throughout Costa Rica.
Technical Data Sheet
- Brand: Hydro-Logic — replacement for Stealth-RO150 and Stealth-RO300
- Production: up to 150 GPD (gallons per day) per membrane
- Rejection: up to 98 %+ of PPM
- Material: thin-film composite (TFC)
- Dimensions: 12 x 2.125 inches — maximum operating pressure 100 PSI
- Maximum operating temperature: 45 °C (113 °F)
Instructions for use
- Shut off the water supply and depressurize the system before opening the filter housing
- Insert the new membrane until the o-ring is fully seated
- Rinse by letting water run for a few minutes before using the permeate
- Change the pre-filters on the same visit: a saturated pre-filter shortens the membrane's life
- Typical lifespan: 6 months to 2 years depending on incoming water quality
- Replace when PPM rejection drops below acceptable levels or flow rate decreases
Especificaciones
Especificaciones
Uso y cuidado
Uso y cuidado
Tu información de pago se procesa de forma segura. Pachamama no almacena ni tiene acceso a los datos completos de tu pago.
Todo lo que necesitas para cultivar con confianza
En Pachamama reunimos marcas de confianza, productos probados y artículos esenciales seleccionados para necesidades reales de cultivo. Desde nutrientes e iluminación hasta sistemas hidropónicos y cuidado de plantas, nuestro catálogo está creado para ayudar a los cultivadores a comprar con más claridad, confianza y respaldo.
