PhotoBio VP White Cable Harness, 18AWG, 110-120V, 5-15P, 10'

The PHOTOBIO VP White Cable Harness is the power cable harness for PHOTOBIO VP LED luminaires, 18AWG gauge, for 110-120V networks, with a 5-15P plug and 10 feet long. It provides an electrical connection at the luminaire level with a plug-and-play system, eliminating the need for on-site wiring work every time you add or move equipment.

Benefits

• Quick connection and disconnection at the luminaire, simplifying assembly and maintenance.
• Mini IP type connectors resistant to dust and liquids from the grow room.
• Standard 5-15P plug, compatible with common 110-120V outlets.
• Ten feet of cable, enough to position the luminaire with plenty of slack.
• White finish that integrates with the VP series luminaires and structures.

How to use

Connect the harness to the PHOTOBIO VP luminaire port following the manufacturer's wiring guide, then plug it into a 110-120V circuit with sufficient capacity for the connected load. Route the cable away from heat sources and sharp edges, and do not use it if the insulation is cut or worn.

Available at Pachamama Indoor Farming Culture, with shipping throughout Costa Rica.

Technical Specifications

• Cable Gauge: 18AWG | Voltage: 110–120V | Plug: 5-15P | Length: 10 ft | Brand: PhotoBio | Type: White cable harness for VP luminaires
• Replacement or extension cable harness for PhotoBio VP LED grow lights
• The 18AWG gauge corresponds to the electrical requirements of the VP series luminaires
• Standard 5-15P plug for connection to 110–120V circuits
• 10 ft length for flexible positioning of luminaires in the grow room

How to Use

• Connect it to the PhotoBio VP LED luminaire following the manufacturer's wiring guide
• Verify that the outlet and circuit can support the power consumption of the connected luminaire
• Do not use if the cable's insulation is cut, worn, or damaged
• Route the cable away from heat sources and sharp edges
• Coil it loosely for storage — do not bend or over-tighten it