Active Aqua 2.0 Infinity Tray, 5' x 6.5' (End Tray w/Drain)

The Active Aqua 2.0 Infinity Tray, 5' x 6.5' (End Tray w/Drain) is the flood tray that closes one end of the modular Infinity system and concentrates the water output at its integrated drain port. It solves the challenge of assembling long ebb and flow tables without puddles or standing water: all nutrient solution returns to the reservoir through this tray. It is made of UV-stable high-impact polystyrene (HIPS), with a low profile of just 2.5 inches high.

Benefits

• Integrated drain port connects directly to the reservoir return line or floor drain.
• Interlocking design with intermediate and divider trays to form a continuous surface up to 65 feet long.
• UV-stable HIPS, chemical-resistant, reusable, and 100% recyclable.
• Shallow channels facilitate cleaning and complete emptying between cycles.
• Compatible with 5-foot wide tables and Active Aqua IZON rolling benches.

How to Use

An Infinity system is assembled in order: one end tray with drain, up to seven intermediate trays, one divider tray, and one end tray. Install this section first, connect the drain port to the reservoir return, and level the entire surface before planting. Run a test cycle with water only to confirm it drains completely and there are no leaks at the joints.

At Pachamama Indoor Farming Culture, you can find it with shipping to anywhere in Costa Rica.

Technical Specifications

• Dimensions: 5 ft x 6.5 ft | Section type: End tray with integrated drain port
• Part of the Active Aqua 2.0 Infinity modular flood tray system
• Drain port allows direct connection to reservoir or floor drain
• Food-grade, UV-stable polypropylene — chemical-resistant and reusable
• Interlocking design connects seamlessly with intermediate tray sections to expand the system

Instructions for Use

• Connect the drain port to the reservoir return line or floor drain before first use
• Level the tray surface to ensure complete and even drainage after each flood cycle
• Perform a test cycle with water only to check for leaks before adding nutrient solution
• Clean with diluted hydrogen peroxide between growing cycles to eliminate algae and pathogens
• Check all interlocking connections and drain couplings during each cycle