Active Aqua Grow Flow 3/4" Tee Hardware Kit, 6-pack

The Active Aqua Grow Flow 3/4" Tee Hardware Kit, pack of 6 is a set of T-fittings for hydroponics designed to build, expand, or repair the fill and drain line of Grow Flow ebb and flow systems. It solves the two most common problems with these systems: leaks in the bucket's perforation and debris that ends up clogging the line.

Benefits

• Includes six 3/4" tees, twelve washers, and six mounting nuts with integrated mesh
• The mesh retains roots and substrate debris that reduce pump flow
• Washers seal the container's perforation and prevent drips
• 3/4" size compatible with Active Aqua Grow Flow hose and modules
• Used to expand the system to more grow sites or to replace worn parts

How to use

Insert the tee into the hole in the bucket or tray, place a washer on each side, and screw on the nut with mesh from inside the container. Tighten by hand only to avoid damaging the plastic and connect the 3/4" hose. Run a fill cycle with water only and check each joint before loading the nutrient solution.

Available at Pachamama Indoor Farming Culture, with shipping throughout Costa Rica.

Technical Sheet

• Includes six 3/4 in T-fittings for Grow Flow ebb and flow irrigation systems
• Compatible with Active Aqua Grow Flow system components
• High-strength polypropylene construction — resistant to corrosion from nutrient solution
• Allows connecting multiple trays from a single flood and drain manifold
• Sold as a complete 6-piece pack to expand multi-site hydroponic systems

How to use

• Use with 3/4 in hose compatible with the Active Aqua Grow Flow system
• Tighten connections by hand — do not apply excessive torque or use pipe wrenches on polypropylene parts
• Inspect all connections for leaks after the first filling of the system, before running a full cycle
• Purge connections with clean water between growing cycles to prevent salt buildup
• Replace any connection showing cracks, discoloration, or signs of chemical degradation