Active Aqua Rubber Grommet, 3/4"

The Active Aqua Rubber Grommet, 3/4" is a rubber grommet used to seal the hole where the hose enters or exits a hydroponic system. This hydroponics grommet creates a watertight seal between the tube and the wall of the reservoir, bucket, or grow tube, preventing leaks and plastic wear from constant rubbing.

Benefits

• Watertight seal for 3/4" hose passages and connectors.
• Flexible rubber that conforms to the edge of the hole and absorbs line vibration.
• Key component for assembling DIY recirculation, drainage, and irrigation systems.
• Also suitable for replacing old grommets that have lost elasticity and are leaking.

How to use

Drill the wall of the reservoir with the corresponding diameter and clean the edge to remove any burrs. Press the grommet until the rubber groove fits into the edge of the hole, then insert the 3/4" connector or hose, moistening the part so it goes in without forcing. Fill the reservoir and check the seal before starting the system.

Find it at Pachamama with shipping throughout Costa Rica.

Technical Data Sheet

• Size: 3/4 inch
• Material: flexible rubber
• Compatibility: 3/4 inch connectors and hoses
• Use: reservoirs, buckets, and tubes of hydroponic systems
• Manufacturer code: HGGR75

How to use

• Drill the wall of the reservoir with the corresponding diameter and clean the edge.
• Press the grommet until the rubber groove fits into the edge of the hole.
• Moisten the part to insert the 3/4" connector or hose without forcing.
• Fill the reservoir and check the seal before starting the system.
• Replace it when it loses elasticity or starts to leak.
• Store it in a sealed bag, away from direct sunlight.