Active Aqua Submersible Water Pump, 550 GPH

The Active Aqua Submersible Water Pump, 550 GPH is a submersible hydroponic pump designed for tanks of around 55 gallons. It is the mid-range option in the Active Aqua line: it moves nutrient solution in recirculating systems, flood and drain tables, or drip irrigation without falling short, and it can also be used in small ponds and fountains.

Benefits

• Flow rate of 550 gallons per hour (approximately 2,000 liters per hour), with 33 W consumption.
• Oil-free mag-drive motor that does not contaminate the nutrient solution.
• Ceramic shaft, also suitable for operation in saltwater.
• Includes 1/2" and 3/4" hose adapters.
• Removable foam filter and impeller, anti-vibration rubber feet, and 6-foot reinforced cord.

How to use

Submerge the pump completely in the reservoir, resting on its rubber feet and separated from the bottom sediment. Choose the adapter that corresponds to your hose diameter, screw it onto the outlet, and secure the hose with a clamp. Avoid dry operation and wash the foam filter every two to three weeks.

Available at Pachamama with shipping throughout Costa Rica.

Technical Data

• Flow rate: 550 GPH (approx. 2,000 liters per hour)
• Consumption: 33 W
• Recommended tank: 55 gallons
• Included hose adapters: 1/2 and 3/4 inch
• 6-foot reinforced power cord
• Manufacturer code: AAPW550

How to use

• Submerge the pump completely before turning it on; never operate it dry.
• Rest it on its rubber feet, separated from the bottom sediment.
• Screw on the adapter of the diameter you are using and secure the hose with a clamp.
• Rinse the foam filter every two to three weeks.
• Unplug the power cord before cleaning or moving it.
• Store it dry and with a clean impeller if you are not going to use it for a while.