CAP Inline Replacement Water Filter Poly Mesh

The C.A.P. replacement inline poly mesh water filter is the filtering element that is replaced inside the C.A.P. inline filter housing. Its mesh retains sediment, sand, and particles carried by the water before they reach pumps, solenoid valves, and drippers, which is precisely where a clog can ruin an entire irrigation cycle.

Benefits

• Protects drippers, micro-sprinklers, and pumps from sediment and sand.
• Washable Poly Mesh: rinse and reinstall it multiple times.
• Direct replacement for the C.A.P. inline filter, no adaptations or extra parts needed.
• Maintains consistent flow throughout the entire irrigation line.

How to use

Close the water supply and depressurize the line before opening the filter housing. Remove the used mesh, place the new one in its housing, and close the casing, ensuring the seal is properly seated. If your water contains a lot of sediment, check the element frequently and rinse it as soon as you notice a drop in pressure.

Available at Pachamama with shipping throughout Costa Rica.

Technical Specifications

• Replacement filtering element for C.A.P. inline water filter.
• Poly Mesh type screen: can be disassembled and rinsed.
• Retains sediment and particles that clog drippers, emitters, and nozzles.
• Installed inside the filter housing, on the water supply line.
• Replacement for the element only: does not include the filter body or bowl.
• Verify the model and diameter of the filter housing you already have installed before purchasing.

How to use

• Close the water supply and depressurize the line before opening the filter.
• Unscrew the filter bowl from the housing and remove the used mesh.
• Place the new mesh firmly and check that the bowl gasket is clean and in place.
• Screw the bowl on by hand, open the water slowly, and check for leaks.
• If the flow starts to decrease, remove the mesh and rinse it thoroughly with clean water.
• Store spare parts in their packaging, in a dry place away from direct sunlight.