Sun System 1 Intelligent Controller Kit

The Sun System 1 Etelligent Controller Kit is a two-channel digital lighting controller that centralizes the management of the entire grow room from a single point. It replaces individual timers with a system that schedules times, simulates sunrise and sunset, and protects ballasts based on the actual room temperature.

Benefits

• Controls up to 400 luminaires in total, with chaining of up to 200 per zone.
• Two independent channels: manages Sun System 1 1000 W and Sun System 1 LEC 315 W Etelligent ballasts with the same equipment.
• Programmed on and off, with sunrise and sunset ramps.
• Two thermal probes for accurate temperature reading, with automatic dimming or shutdown when the defined threshold is exceeded.
• Complete kit: includes the controller, power adapter, and all signal and probe wiring.

How to use

Connect the 5 ft universal adapter to the controller and link the ballasts with the 16 ft signal cables with ferrites, assigning each type of ballast to its own channel. Place the two 16 ft temperature probes at canopy height so that the reading reflects what the plants receive. Then program the schedule, sunrise and sunset ramps, and the thermal protection threshold.

Available at Pachamama with shipping throughout Costa Rica.

Technical specifications

• Brand: Sun System
• Type: 2-channel Etelligent digital lighting controller
• Capacity: up to 400 luminaires in total, with chaining of up to 200 per zone
• Compatibility: Sun System 1 1000 W and Sun System 1 LEC 315 W Etelligent ballasts, each on an independent channel
• Functions: programmed on and off, sunrise and sunset simulation, temperature reading with two probes, and automatic dimming or shutdown by thermal threshold
• Kit contents: 1 Etelligent controller, 1 universal power adapter with 5 ft (1.5 m) cable, 2 16 ft (5 m) signal cables with ferrites, and 2 16 ft (5 m) temperature probes

How to use

• Connect the 5 ft universal power adapter to the controller and power it from a protected outlet.
• Link the controller with the ballasts using the 16 ft signal cables with ferrites and daisy-chain the luminaires per channel, up to 200 per zone.
• Assign the 1000 W and LEC 315 W ballasts to different channels, as each channel operates independently.
• Locate the two temperature probes at canopy height so that the reading reflects the temperature the plants receive.
• Program the on and off schedule, sunrise and sunset ramps, and the thermal dimming or automatic shutdown threshold.
• Install the controller in a dry place, away from drips, irrigation, and direct heat sources.